Home > GE Grill Models > GE ZGG27N21YSSGE Monogramฎ 27" Outdoor Cooking Center with 2 Grill Burners, Rotisserie and Rack
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Part diagrams and owners manuals for GE model: ZGG27N21YSS
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the GE ZGG27N21YSS
ZGG27N21YSS Burners
WB28X10025-R-X2 Cast iron H burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025-X2
Part Number: WB28X10025-R-X2
Dimensions: 16 x 6 1/4
Material: cast iron
Weight: 20.6
$202.40 $149.99
WB28X10025-R Cast iron H burner with integrated center-fed cast iron venturi. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025
Part Number: WB28X10025-R
Dimensions: 16 x 6 1/4
Material: cast iron
Weight: 10.3
$94.78
ZGG27N21YSS Grill Racks
Premium quality heavy duty stainless steel grill rack. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.
Our USA-made premium stainless grids are simply the best obtainable.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16 solid stainless rods
- Dimensions: 19 1/2 x 12 3/4
- Made in USA .
- Sold individually.
Part Number: WB49X10019-SS
Dimension Front-to-Back: 19 1/2
Dimension Side-to-Side: 12 3/4
Material: stainless steel
Weight: 7.3
$84.65
ZGG27N21YSS Lava Rock Support
Stainless steel
heat plate/lava rock support. Made in USA
.
NOTE: This part does not match the original exactly but is a fully functional replacement.
NOTE: >Sometimes shipped with peel-off vinyl coating. Remove before use.Replaces GE factory part# WB02X10434
Part Number: WB02X10434-R
Material: stainless steel
Weight: 2.3
$59.46
ZGG27N21YSS Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016
Part Number: 03220
Weight: 0.2
$17.41
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659
Part Number: WB02X10659-R
Weight: 0.2
$13.25
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660
Part Number: WB02X10660-R
Weight: 0.2
$13.25
ZGG27N21YSS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16 x 1 5/16
Material: brass
Weight: 0.3
$28.50
ZGG27N21YSS Rotisserie components
Plastic spit rod handle with brass insert.
- Requires bushing BU-1 (5/16 square spit rods) or BU-2 (3/8 square spit rods)
- Will fit our spit rods: SR-5; SR-8; SR-43
- Requires a threaded end on the spit rod
- The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005
Part Number: PH-1
Weight: 0.2
$6.70
ZGG27N21YSS Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2 apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17 x 26.
- Top quality product
- Each briquette measure 2 x 2
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15 x 24
- 70 briquetes covers an area apprimately 17 x 26
- 90 briquetes covers an area apprimately 17 x 33
Made in USA Part Number: CLA-AC0399
Dimensions: 2 x 2
Material: ceramic
Weight: 9.75
$63.34 $56.40
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73