GE ZGG36L20CSS

Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.

Replaces GE factory part# WB28X10007

Part Number: 12181
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces GE factory part# WB02X10376

Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05

WB28X10021-R-X2 Cast iron ”H” burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10021-X2

Part Number: WB28X10021-R-X2
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 27.2

WB28X10021-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10021

Part Number: WB28X10021-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Replaces GE factory part# WB49X10013

Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA .
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

WB02X10661-R Stainless steel Gourmet Radiant Tray. Uniquely shaped to effectively distribute the heat from the burners evenly across the grill area.

Flare ups are minimized because the Gourmet Radiant Trays quickly redirects grease down to the drip pan before it can begin to burn.

• WB02X10661-R is an aftermarket part designed to replace the original GE part# WB02X10661.
• WB02X10661-R is also an aftermarket part designed to replace the original Fisher&Paykel part# 214252P.
• Fits 27”, 36”, and 48” models.
• Made in USA
• Sold individually

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces GE factory part# WB02X10661

Part Number: WB02X10661-R
Dimensions: 19 1/4” x 9 1/4”
Material: stainless steel
Weight: 2.2

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Made in USA

Replaces GE factory part# WB32X10002

Part Number: WB32X10002-R
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

Rotary piezo spark generator. Two round connector leads send spark to both main burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB03X10016

Part Number: 03220
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB02X10659

Part Number: WB02X10659-R
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB02X10660

Part Number: WB02X10660-R
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces GE factory part# WB21X10013

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3