Home > GE Grill Models > GE ZGG48L30YSS
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Replacement BBQ grill parts for GE model: ZGG48L30YSS
ZGG48L30YSS Burners
Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.
Replaces GE factory part# WB28X10007
Part Number: 12181
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7
$36.11
Burner air shutter. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces GE factory part# WB02X10376
Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05
$3.62
WB28X10008-R-X3 Cast iron ”H” burners. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10008-X3
Part Number: WB28X10008-R-X3
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 42.0
$371.00 $269.99
WB28X10008-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10008
Part Number: WB28X10008-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 14.0
$124.40 $99.99
ZGG48L30YSS Grill Racks
Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.
- Large diameter 3/8” steel rods
- Dimensions: 20 1/2” x 10 3/8”
- Sold individually.
Replaces GE factory part# WB49X10013
Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11
$81.74
Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.
Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.
- 304 commercial grade stainless steel
- Large diameter 3/8” solid stainless rods
- Dimensions: 20 1/2” x 10 3/8”
- Made in USA .
- Sold individually.
Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2
$144.53
ZGG48L30YSS Lava Rock Support
Stainless steel
heat plate/lava rock support. Made in USA
.
Replaces GE factory part# WB02X10384
Part Number: WB02X10384-R
Material: stainless steel
Weight: 2.3
$72.48
ZGG48L30YSS Smoker Trays
WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.
The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.
Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.
This aftermarket part designed to replace original GE part# WB32X10002.
Made in USA Replaces GE factory part# WB32X10002
Part Number: WB32X10002-R
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05
$89.77
ZGG48L30YSS Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016
Part Number: 03220
Weight: 0.2
$17.41
ZGG48L30YSS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3
$28.50
ZGG48L30YSS Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73