GE ZGG48L31ASS

Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.

Replaces GE factory part# WB28X10007

Part Number: 12181
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces GE factory part# WB02X10376

Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05

WB28X10008-R-X3 Cast iron ”H” burners. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10008-X3

Part Number: WB28X10008-R-X3
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 42.0

WB28X10008-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10008

Part Number: WB28X10008-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 14.0

WB28X10021-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10021

Part Number: WB28X10021-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Replaces GE factory part# WB49X10013

Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA .
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

Stainless steel heat plate/lava rock support. Made in USA .

Replaces GE factory part# WB02X10384

Part Number: WB02X10384-R
Material: stainless steel
Weight: 2.3

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Made in USA

Replaces GE factory part# WB32X10002

Part Number: WB32X10002-R
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB07X10084

Part Number: 06020
Material: ceramic
Weight: 0.2

Rotary piezo spark generator. Two round connector leads send spark to both main burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB03X10016

Part Number: 03220
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces GE factory part# WB21X10013

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Replaces GE factory part# WB15X10005

Part Number: PH-1
Weight: 0.2

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5