Home > GE Grill Models > GE ZGG48L31CSSGE Monogramฎ 48" Outdoor Cooking Center
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Replacement gas grill parts for GE model: ZGG48L31CSS
ZGG48L31CSS Burners
Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.
Replaces GE factory part# WB28X10007
Part Number: 12181
Dimensions: 18 x 1
Material: stainless steel
Weight: 0.7
$36.11
Burner air shutter. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces GE factory part# WB02X10376
Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05
$3.62
WB28X10021-R-X3 Cast iron H burners. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10021-X3
Part Number: WB28X10021-R-X3
Dimensions: 20 1/2 x 6 1/4
Material: cast iron
Weight: 40.8
$371.00 $269.99
WB28X10021-R Cast iron H burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10021
Part Number: WB28X10021-R
Dimensions: 20 1/2 x 6 1/4
Material: cast iron
Weight: 13.6
$124.40 $99.99
ZGG48L31CSS Grill Racks
Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.
- Large diameter 3/8 steel rods
- Dimensions: 20 1/2 x 10 3/8
- Sold individually.
Replaces GE factory part# WB49X10013
Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2
Dimension Side-to-Side: 10 7/16
Material: porcelain steel wire
Weight: 10.11
$81.74
Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.
Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.
- 304 commercial grade stainless steel
- Large diameter 3/8 solid stainless rods
- Dimensions: 20 1/2 x 10 3/8
- Made in USA .
- Sold individually.
Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2
Dimension Side-to-Side: 10 3/8
Material: stainless steel
Weight: 10.2
$144.53
ZGG48L31CSS Radiant Trays
WB02X10661-R Stainless steel Gourmet Radiant Tray. Uniquely shaped to effectively distribute the heat from the burners evenly across the grill area.
Flare ups are minimized because the Gourmet Radiant Trays quickly redirects grease down to the drip pan before it can begin to burn.
- WB02X10661-R is an aftermarket part designed to replace the original GE part# WB02X10661.
- WB02X10661-R is also an aftermarket part designed to replace the original Fisher&Paykel part# 214252P.
- Fits 27, 36, and 48 models.
- Made in USA
- Sold individually
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces GE factory part# WB02X10661
Part Number: WB02X10661-R
Dimensions: 19 1/4 x 9 1/4
Material: stainless steel
Weight: 2.2
$99.99
ZGG48L31CSS Smoker Trays
WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.
The overall length of this part, including the handle, is 23 3/4. The tray, without the handle, measures 2 1/2 X 21 1/2.
Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.
This aftermarket part designed to replace original GE part# WB32X10002.
Made in USA Replaces GE factory part# WB32X10002
Part Number: WB32X10002-R
Dimensions: 23 3/4 x 2 1/2
Material: stainless steel
Weight: 1.05
$89.77
ZGG48L31CSS Igniter Components
Igniter electrode kit for use on DCS models with cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB07X10084
Part Number: 06020
Material: ceramic
Weight: 0.2
$14.09
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016
Part Number: 03220
Weight: 0.2
$17.41
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659
Part Number: WB02X10659-R
Weight: 0.2
$13.25
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660
Part Number: WB02X10660-R
Weight: 0.2
$13.25
ZGG48L31CSS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16 x 1 5/16
Material: brass
Weight: 0.3
$28.50
ZGG48L31CSS Rotisserie components
Plastic spit rod handle with brass insert.
- Requires bushing BU-1 (5/16 square spit rods) or BU-2 (3/8 square spit rods)
- Will fit our spit rods: SR-5; SR-8; SR-43
- Requires a threaded end on the spit rod
- The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005
Part Number: PH-1
Weight: 0.2
$6.70
ZGG48L31CSS Accessories
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Dimensions: 6 1/2 x 10
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57