GE ZGG48N30YSS

Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.

Replaces GE factory part# WB28X10007

Part Number: 12181
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces GE factory part# WB02X10376

Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05

WB28X10008-R-X3 Cast iron ”H” burners. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10008-X3

Part Number: WB28X10008-R-X3
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 45.60

WB28X10008-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10008

Part Number: WB28X10008-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 14.0

Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Replaces GE factory part# WB49X10013

Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA .
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

Stainless steel heat plate/lava rock support. Made in USA .

Replaces GE factory part# WB02X10384

Part Number: WB02X10384-R
Material: stainless steel
Weight: 2.3

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Made in USA

Replaces GE factory part# WB32X10002

Part Number: WB32X10002-R
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

Rotary piezo spark generator. Two round connector leads send spark to both main burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB03X10016

Part Number: 03220
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces GE factory part# WB21X10013

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2