Home > GE Grill Models > GE ZGG48N42C2SS
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Replacement grill parts for the GE ZGG48N42C2SS
ZGG48N42C2SS Burners
Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.
Replaces GE factory part# WB28X10007
Part Number: 12181
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7
$36.11
Burner air shutter. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces GE factory part# WB02X10376
Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05
$3.62
WB28X10021-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10021. Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10021
Part Number: WB28X10021-R
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6
$124.40 $99.99
ZGG48N42C2SS Grill Racks
Porcelain steel Grill Rack. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.
- Large diameter 3/8” steel rods
- Dimensions: 20 1/2” x 10 3/8”
- Sold individually.
Replaces GE factory part# WB49X10013
Part Number: WB49X10013-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11
$81.74
Premium quality heavy duty stainless steel grill rack. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.
Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.
- 304 commercial grade stainless steel
- Large diameter 3/8” solid stainless rods
- Dimensions: 20 1/2” x 10 3/8”
- Made in USA .
- Sold individually.
Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2
$144.53
ZGG48N42C2SS Radiant Trays
WB02X10661-R Stainless steel Gourmet Radiant Tray. Uniquely shaped to effectively distribute the heat from the burners evenly across the grill area.
Flare ups are minimized because the Gourmet Radiant Trays quickly redirects grease down to the drip pan before it can begin to burn.
- WB02X10661-R is an aftermarket part designed to replace the original GE part# WB02X10661.
- WB02X10661-R is also an aftermarket part designed to replace the original Fisher&Paykel part# 214252P.
- Fits 27”, 36”, and 48” models.
- Made in USA
- Sold individually
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces GE factory part# WB02X10661
Part Number: WB02X10661-R
Dimensions: 19 1/4” x 9 1/4”
Material: stainless steel
Weight: 2.2
$99.99
ZGG48N42C2SS Smoker Trays
WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.
The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.
Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.
This aftermarket part designed to replace original GE part# WB32X10002.
Made in USA Replaces GE factory part# WB32X10002
Part Number: WB32X10002-R
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05
$89.77
ZGG48N42C2SS Igniter Components
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659
Part Number: WB02X10659-R
Weight: 0.2
$13.25
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660
Part Number: WB02X10660-R
Weight: 0.2
$13.25
ZGG48N42C2SS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3
$28.50
ZGG48N42C2SS Rotisserie components
Plastic spit rod handle with brass insert.
- Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
- Will fit our spit rods: SR-5; SR-8; SR-43
- Requires a threaded end on the spit rod
- The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005
Part Number: PH-1
Weight: 0.2
$6.70
ZGG48N42C2SS Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59