Home > Grill Chef Grill Models > Grill Chef PAT502
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Grill Chef grill.
Replacement grill parts for Grill Chef model: PAT502
PAT502 Burners
Stainless steel tube burner. Includes
Part Number: 11631
Dimensions: 15 1/8 x 1
Material: stainless steel
Weight: 0.8
$32.54
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
PAT502 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 51631
Dimension Front-to-Back: 19
Dimension Side-to-Side: 6 5/16
Material: porcelain steel wire
Weight: 4.0
$54.25
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually.
Part Number: 69501
Dimension Front-to-Back: 19
Dimension Side-to-Side: 6 1/8
Material: cast iron
Weight: 4.85
$53.94
Aftermarket reversible heavy cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
- Pointed side is designed for perfect sear marks
- Grooved side captures juices for continous basting
Fits: Broil King 500/625/750 series grills.
NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.
Part Number: 22005-281-R
Dimension Front-to-Back: 19 1/4
Dimension Side-to-Side: 6 1/16
Material: Cast iron
Weight: 5.0
$31.20
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.
Part Number: 67845-1PC
Dimension Front-to-Back: 19 3/16
Dimension Side-to-Side: 6 1/16
Material: matte cast iron
Weight: 5.5
$36.73
Cast iron
cooking grids,
porcelain treated, flat matte finish for Grill Chef model PAT502.
Part Number: 67845
Dimension Front-to-Back: 19 3/16
Dimension Side-to-Side: 30 5/16
Material: matte cast iron
Weight: 27.2
$152.39
PAT502 Heat Plates
Porcelain steel
heat plate. Sold individually.
Part Number: 91631
Dimension Front-to-Back: 15 1/16
Dimension Side-to-Side: 4
Material: porcelain steel
Weight: 1.0
$33.40 $22.99
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0130
Dimension Front-to-Back: 15 1/16
Dimension Side-to-Side: 4
Material: stainless steel
Weight: 0.60
$24.95 $15.48
PAT502 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
PAT502 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4 x 12 3/4
Material: stainless steel
Weight: 1.6
$22.70
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57