Home > GrillPro Grill Models > GrillPro 218744
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.
Part diagrams and owners manuals for GrillPro model: 218744
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for GrillPro model: 218744
218744 Burners
Genuine OEM GrillPro stainless steel burner for GrillPro model 218744.
Part Number: C13500
Dimensions: 14 5/8” x 1 1/4”
Material: Stainless steel
Weight: 0.5
$17.40
218744 Burner Brackets and Carryovers
Stainless steel 4 burner support Channel Cross Light bracket. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA Part Number: 342-C550-R
Dimensions: 29 11/16
Material: stainless steel
Weight: 1.0
$39.66
218744 Heat Plates
Stainless steel Flav-R-Wav/Flame Tamer. Made in USA
.
Part Number: CLA-TS0111
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 6 1/8”
Material: stainless steel
Weight: 0.9
$20.72
218744 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
ELECTRODE ASSEMBLY S/B GPB
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 342-C534
Weight: 0.1
Image not available
$8.99
218744 Knobs and Handles
BEZEL - LID HANDLE GPB for GrillPro model 218744.
Part Number: 239-C506
Weight: 0.1
Image not available
$1.36
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 218744.
Part Number: 472-C502
Weight: 0.05
$5.15
218744 Regulators and Hoses
Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.
Part Number: HR-6B
Dimensions: 28
Weight: 1.50
$36.49
218744 Wheels and Castors
CLIP - WHEEL AXLE GPB for GrillPro model 218744.
Part Number: C11650
Weight: 0.02
$1.92
218744 Valves, Orifices, and Manifolds
ORIFICE SUPPORT RB 4B GPB for GrillPro model 218744.
Part Number: 696-C500
Weight: 0.2
$2.48
218744 Heat indicators and Meat Thermometers
Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
218744 Side Burners
GRATE COOKING SB GPB for GrillPro model 218744.
Part Number: 225-C554
Weight: 0.7
$11.51
218744 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57