GrillPro 238264

Genuine OEM GrillPro Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Cast iron cooking grid.

• Sold individually
• Number required varies, check your grill
• Porcelain enameled, glossy finish

Part Number: 22005-181-R
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 12 1/2”
Material: Cast iron
Weight: 7.5

Genuine OEM GrillPro stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15

Genuine OEM GrillPro electronic push-button 4-spade igniter.

• Uses AAA battery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-247
Weight: 0.5

Genuine OEM GrillPro Porcelain Grease Pan for GrillPro model 238264.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

Genuine OEM GrillPro silver control knob.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.

• Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: 1/2 inch

Part Number: 22002-96
Weight: 0.1

CONTROL KNOB CHROME - SMALL for GrillPro model 238264.

Part Number: 22004-96
Weight: 0.1

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Rubber castor, 3” w/plate, locking for GrillPro model 238264.

Part Number: 10892-23
Weight: 0.66

VALVE ASSY FLEX 5V S/B GT625 GPC for GrillPro model 238264.

Part Number: 28806-039C
Weight: 1.0

Genuine OEM GrillPro Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.

Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1

Hinge pin clip for GrillPro model 238264.

Part Number: S21233
Weight: 0.01

Cotter pin for GrillPro model 238264.

Part Number: Y-11230
Weight: 0.01

Washer for GrillPro model 238264.

Part Number: S21255
Weight: 0.01

SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9” diameter round and has two support prongs. Porcelain coated, glossy finish.

Note: Some owners manuals incorrectly list this part as 53139-98.

Part Number: 53140-981
Weight: .8

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2