Home > GrillPro Grill Models > GrillPro 24025-013
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your GrillPro grill. This is best done with the old parts out of the grill. Verify your GrillPro grill model number.
Replacement grill parts for GrillPro model: 24025-013
24025-013 Burners
Stainless steel burner and venturi assembly for Fiesta 240 series grills. This part is also the factory replacement for burner SM164A12
Part Number: SM191A-12
Dimensions: 3 1/2” x 13 7/8”
Material: stainless steel
Weight: 1.22
$51.90
24025-013 Cooking Grids
Chrome steel
cooking grid. Sold individually.
Part Number: 40101
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: chrome steel wire
Weight: 2.4
$28.17
Genuine OEM GrillPro porcelain steel
cooking grid.
Note: This is also a factory replacement for part SP124-3, which has been discontinued.
Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36
$43.73
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 54101
Dimension Front-to-Back: 11 3/8”
Dimension Side-to-Side: 20”
Material: porcelain steel wire
Weight: 2.0
$44.30
24025-013 Smart Bars
Genuine OEM GrillPro Smart Bar.
Note: This is also a factory replacement for part SP68-9, which has been discontinued.
Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6
$27.45
Stainless steel
Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6
$46.73
24025-013 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Genuine OEM GrillPro snap-on electrode, wire, and collector box assembly.
Note: This part does not fit our after-market burners such as 19002.
This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP5016-20
Weight: 0.05
$8.40
Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
$6.37
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
24025-013 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
Mini grease bucket used with wire holder S15111 for GrillPro model 24025-013.
Part Number: S15112
Weight: .03
$2.83
24025-013 Knobs and Handles
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for GrillPro model 24025-013.
Part Number: SP5001-40
Weight: .03
Image not available
$2.89
24025-013 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for GrillPro model 24025-013.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for GrillPro model 24025-013.
Part Number: 10240-13
Weight: .10
$2.23
24025-013 Warming Racks
Genuine OEM GrillPro chrome warming rack for GrillPro model 24025-013.
Part Number: SP5021-3
Material: chrome steel
Weight: 1.15
$26.57
24025-013 Miscellaneous Repair Parts
HEAT SHIELD FIESTA 240/300 -- (2011) for GrillPro model 24025-013.
Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46
$19.83
Hinge pin clip for GrillPro model 24025-013.
Part Number: S21233
Weight: 0.01
$1.08
24025-013 Cart Parts
LEG EXTENSION OFF-SET for GrillPro model 24025-013.
Part Number: 11494-148
Weight: 0.05
Image not available
$1.95
24025-013 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59