Home > GrillPro Grill Models > GrillPro 268527
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your GrillPro grill. This is best done with the old parts out of the grill. Verify your GrillPro grill model number.
Part diagrams and owners manuals for GrillPro model: 268527
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit GrillPro model: 268527
268527 Burners
Stainless steel burner for GrillPro model 268527.
Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8
$35.18
SIDE BURNER GPB for GrillPro model 268527.
Part Number: 390-C333
Weight: 1.0
Image not available
$21.00
268527 Cooking Grids
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11
$35.46
268527 FLAV-R-WAVE
Stainless steel Flav-R-Wave. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8
$29.85
268527 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
268527 Knobs and Handles
HANDLESEAT LEFT GPB for GrillPro model 268527.
Part Number: 338-C310
Weight: 1.0
Image not available
$16.39
HANDLESEAT RIGHT GPB for GrillPro model 268527.
Part Number: 338-C311
Weight: 1.0
Image not available
$16.39
Genuine OEM GrillPro control knob..
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: none (flat)
Part Number: 472-C565
Weight: 0.1
$8.15
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 268527.
Part Number: 472-C502
Weight: 0.05
$5.15
Control knob side/rear burner.
- Off position D-Value: 6 o'clock or 12:00 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm (5/16”)
- Knob shaft/stem: None (flat)
Part Number: 472-C555
Weight: 0.05
$6.09
268527 Warming Racks
Genuine OEM GrillPro warming rack for GrillPro model 268527.
Part Number: 225-C430
Weight: 2.4
$24.72
268527 Valves, Orifices, and Manifolds
Side burner valve for GrillPro model 268527.
Part Number: 440-C335
Weight: 1.0
Image not available
$18.47
268527 Heat indicators and Meat Thermometers
Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
268527 Miscellaneous Repair Parts
WIND SHIELD REAR BURNER GPB for GrillPro model 268527.
Part Number: 393-C441
Weight: 0.11
$7.97
268527 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60