GrillPro 30030-013

Stainless steel twin oval burner and venturi assembly. Fits some Broil-Mate and Fiesta 300 series grills. Includes

• SS Oval burner
• Two (2) twist-in venturis with integrated spider guards
• Ceramic electrode and wire

Part Number: SM190A-12
Material: stainless steel
Weight: 1.3

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

Genuine OEM GrillPro porcelain steel cooking grid.

Note: This is also a factory replacement for part SP43-3, which has been discontinued.

Part Number: SP43A-3
Dimension Front-to-Back: 13 1/4”
Dimension Side-to-Side: 21 3/8”
Material: porcelain steel
Weight: 3.0

Genuine OEM GrillPro Smart Bar.

Note: This is also a factory replacement for part SP68-9, which has been discontinued.

Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Genuine OEM GrillPro snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA

Part Number: S15111
Material: stainless steel
Weight: 0.02

Mini grease bucket used with wire holder S15111 for GrillPro model 30030-013.

Part Number: S15112
Weight: .03

Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for GrillPro model 30030-013.

Part Number: SP5001-40
Weight: .03

Wheel 6” plastic with 3/8” axle hole for GrillPro model 30030-013.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for GrillPro model 30030-013.

Part Number: 10240-13
Weight: .10

Genuine OEM GrillPro chrome steel warming rack for GrillPro model 30030-013.

Part Number: SP5022-3
Dimensions: 25 3/8”
Material: chrome steel
Weight: 2.5

HEAT SHIELD FIESTA 240/300 -- (2011) for GrillPro model 30030-013.

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Hinge pin clip for GrillPro model 30030-013.

Part Number: S21233
Weight: 0.01

LEG EXTENSION OFF-SET for GrillPro model 30030-013.

Part Number: 11494-148
Weight: 0.05

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3