Home > GrillPro Grill Models > GrillPro 30040-023
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.
Replacement grill parts for GrillPro model: 30040-023
30040-023 Burners
Stainless steel twin oval burner and venturi assembly. Fits some Broil-Mate and Fiesta 300 series grills. Includes
- SS Oval burner
- Two (2) twist-in venturis with integrated spider guards
- Ceramic electrode and wire
Part Number: SM190A-12
Material: stainless steel
Weight: 1.3
$52.07
Genuine OEM GrillPro Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
30040-023 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
30040-023 Cooking Grids
Genuine OEM GrillPro porcelain steel
cooking grid.
Note: This is also a factory replacement for part SP43-3, which has been discontinued.
Part Number: SP43A-3
Dimension Front-to-Back: 13 1/4”
Dimension Side-to-Side: 21 3/8”
Material: porcelain steel
Weight: 3.0
$33.28
30040-023 Smart Bars
Genuine OEM GrillPro Smart Bar.
Note: This is also a factory replacement for part SP68-9, which has been discontinued.
Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6
$27.45
Stainless steel
Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6
$46.73
30040-023 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Genuine OEM GrillPro snap-on electrode, wire, and collector box assembly.
Note: This part does not fit our after-market burners such as 19002.
This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP5016-20
Weight: 0.05
$8.40
Genuine OEM GrillPro push button igniter. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
Genuine OEM GrillPro 28” wire for side burner. One female
spade connector, one female
round connector..
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T16
Dimensions: 28
Weight: 0.05
$4.50
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
30040-023 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
30040-023 Knobs and Handles
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for GrillPro model 30040-023.
Part Number: SP5001-40
Weight: .03
Image not available
$2.89
30040-023 Regulators and Hoses
HOSE SIDE BRNR W/.079 ORIFICE
Part Number: S13467-079
Weight: 1.0
Image not available
$24.42
30040-023 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for GrillPro model 30040-023.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for GrillPro model 30040-023.
Part Number: 10240-13
Weight: .10
$2.23
30040-023 Warming Racks
Genuine OEM GrillPro chrome steel warming rack for GrillPro model 30040-023.
Part Number: SP5022-3
Dimensions: 25 3/8”
Material: chrome steel
Weight: 2.5
$27.72
30040-023 Miscellaneous Repair Parts
HEAT SHIELD FIESTA 240/300 -- (2011) for GrillPro model 30040-023.
Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46
$19.83
Cotter pin for GrillPro model 30040-023.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for GrillPro model 30040-023.
Part Number: S21233
Weight: 0.01
$1.08
30040-023 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for GrillPro model 30040-023.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
30040-023 Cart Parts
LEG EXTENSION OFF-SET for GrillPro model 30040-023.
Part Number: 11494-148
Weight: 0.05
Image not available
$1.95
30040-023 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31