Home > GrillPro Grill Models > GrillPro 3450-14
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.
Replacement gas grill parts for GrillPro model: 3450-14
3450-14 Burners
Genuine OEM GrillPro stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10017
Dimensions: 8 x 20 1/2
Material: Stainless steel
Weight: 3.5
$76.25
3450-14 Cooking Grids
COOKING GRID 390 PORCELAIN, GLOSSY COATED. SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
Part Number: 04160152
Dimension Front-to-Back: 15 1/16
Dimension Side-to-Side: 12 3/4
Material: porcleain steel
Weight: 5.8
Image not available
$42.40
3450-14 FLAV-R-WAVE
Genuine OEM GrillPro stainless steel Flav-R-Wave
heat plate. Also replaces porcelain-steel part# 10222-T424, which has been discontinued by the manufacturer.
Part Number: 10222-T425
Dimension Front-to-Back: 11 1/4
Dimension Side-to-Side: 23
Material: Stainless steel
Weight: 3.0
$48.91
3450-14 Igniter Components
Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
$6.37
Genuine OEM GrillPro collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18 wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
3450-14 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
3450-14 Knobs and Handles
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4 long. Requires 8 3/4 mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
3450-14 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
3450-14 Wheels and Castors
Genuine OEM GrillPro 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for GrillPro model 3450-14.
Part Number: 10240-13
Weight: .10
$2.23
3450-14 Miscellaneous Repair Parts
Hinge pin clip for GrillPro model 3450-14.
Part Number: S21233
Weight: 0.01
$1.08
Washer for GrillPro model 3450-14.
Part Number: S21255
Weight: 0.01
$1.08
3450-14 Accessories
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73