Home > GrillSmith Grill Models > GrillSmith GR2264406-GSGrillSmith 5 Burner Premium Gas Grill With Side Burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillSmith grill.
Part diagrams and owners manuals for GrillSmith model: GR2264406-GS
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit GrillSmith model: GR2264406-GS
GR2264406-GS Burners
Stainless steel tube burner. Includes
WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.
Part Number: 16261
Dimensions: 17 1/2” x 1”
Material: stainless steel
Weight: 0.6
$46.12
GR2264406-GS Burner Brackets and Carryovers
stainless steel cross-over for GrillSmith model GR2264406-GS.
Part Number: 09431
Dimensions: 6 9/16” x 2 1/4”
Material: stainless steel
Weight: 0.2
$19.91
GR2264406-GS Cooking Grids
matte finish cast iron
cooking grid for GrillSmith model GR2264406-GS.
Part Number: 64443
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 26 13/16”
Material: matte cast iron
Weight: 26.7
$161.35
Aftermarket reversible heavy cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
- Pointed side is designed for perfect sear marks
- Grooved side captures juices for continous basting
Fits: Broil King 500/625/750 series grills.
NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.
Part Number: 22005-281-R
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 6 1/16”
Material: Cast iron
Weight: 5.0
$31.20
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish.
Part Number: 61812
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 26 3/8”
Material: gloss cast iron
Weight: 15.0
$104.05
GR2264406-GS Heat Plates
Stainless steel
heat plate/ Flame Tamer. Sold individually, number required varies.
Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5
$24.34
GR2264406-GS Heat Tents
Stainless steel Flame Tamer heat tent.
- Stainless equivalent of part 91751
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 91751-SS
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5
$24.34
GR2264406-GS Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
GR2264406-GS Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
GR2264406-GS Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96