Home > Home Depot Grill Models > Home Depot 720-0896
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.
Replacement grill parts for Home Depot model: 720-0896
720-0896 Burners
stainless steel burner for Home Depot model 720-0896.
Part Number: 14641
Dimensions: 14 7/8 x 2 5/8
Material: stainless steel
Weight: 0.9
$31.63
stainless steel burner for Home Depot model 720-0896.
Part Number: 14781
Dimensions: 15 x 0 5/8
Material: stainless steel
Weight: 0.4
$28.91
720-0896 Cooking Grids
matte finish cast iron
cooking grid for Home Depot model 720-0896.
Part Number: 66173
Dimension Front-to-Back: 17 1/16
Dimension Side-to-Side: 33 3/16
Material: matte cast iron
Weight: 15.3
$123.82
720-0896 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 97371
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 0.55
$21.54
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.16
$48.77
SET OF FOUR/4 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.88
$62.52
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 0.72
$17.61
Porcelain steel Flame Tamers. SET OF SIX.
Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 3.3
Image not available
$105.36
720-0896 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
electrode with female spade connection and 45 ins. wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 01473
Dimensions: 3 3/4 x 1
Weight: 0.1
$12.00
electrode with female spade connection and 13 ins. wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04439
Dimensions: 3 5/8 x 1 5/16
Weight: 0.1
$7.80
720-0896 Heat indicators and Meat Thermometers
Heat indicator with a single probe and requires a 5/16 mounting hole. Note, the back side DOES NOT have an alignment pin.
Part Number: 00021
Dimensions: 3 5/8 x 1 3/4
Weight: 0.2
$15.90
720-0896 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Dimensions: 6 1/2 x 10
Weight: 1.1
$19.30
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31