Home Depot DGE486SSP-D

105-13011-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R-X4
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 2.1

105-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5

166-13002-R-X3Cooking Grate. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R-X3
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1

166-13002-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG1-166-13002-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 5/8”
Material: cast iron
Weight: 10.10

105-13003-R-X4 Heat tent. Set of four (4). Porcelain enameled steel..

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X4
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4
Material: ceramic
Weight: 0.4

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R
Weight: 0.7

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Home Depot factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1