Parts for Home Depot DGF493BNP

Home > Home Depot Grill Models > Home Depot DGF493BNP

Dyna-Glo model DGF493BNP 4-Burner LP Gas Grill

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.

Replacement grill parts for Home Depot model: DGF493BNP

DGF493BNP Burners

Stainless steel burner for Home Depot model DGF493BNP.

Part Number: 19991
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

$33.45

70-01-282-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo grill models including:

DGB494SPB
DGB494SDP
DGB515SDP
DGB610SSP
DGF493BNP
DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R-X4
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 2.4

$111.43

70-01-282-R Main Burner. Stainless steel. Fits Dyna-Glo grill models including:

DGB494SPB
DGB494SDP
DGB515SDP
DGB610SSP
DGF493BNP
DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

$33.45

All Home Depot Burners

DGF493BNP Cooking Grates

70-01-273-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGB493, DGB494, and DGB495 series grills. May fit other models.

This grate replaces original Dyna-Glo part 70-01-273.

Part Number: DG1-70-01-273-R
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 27 3/4”
Material: matte cast iron
Weight: 11.12

$85.93

All Home Depot Cooking Grates

DGF493BNP Heat Tents

70-01-179-R-X4 Heat tent. Set of four (4). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 2.3

$78.21

70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

$22.49

70-01-179-SS-X4 Heat tent. Set of four (4). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA About our made-in-the-USA Home Depot grill parts

Part Number: DG3-70-01-179-SS-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

$87.96

70-01-179-SS Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA About our made-in-the-USA Home Depot grill parts

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

$23.42

All Home Depot Heat Tents

DGF493BNP Igniter Components

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

Wire not included. Commonly used with wire part# 03610.
Female spade connector on wire connects to male spade connector of electrode.
If used with existing wire, confirm connecting end of wire is a female spade connector
Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

$6.58

All Home Depot Igniter Components

DGF493BNP Grease Trays

Stainless steel grease draining tray with grease cup and holder. Made in USA

Replaces Home Depot factory part# DYG-70-01-279

Part Number: CLA-DS0276
Dimensions: 15 3/4” x 26 7/8”
Material: stainless steel
Weight: 4.6

$60.17

All Home Depot Grease Trays

DGF493BNP Heat indicators and Meat Thermometers

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Home Depot factory part# DYG-70-04-100

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

$9.95

All Home Depot Heat indicators and Meat Thermometers

DGF493BNP Accessories

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

$16.59

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$5.77

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

$27.83

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5

$17.59

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.