Home Depot DGF493PNP-D

Stainless steel burner for Home Depot model DGF493PNP-D.

Part Number: 19991
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

70-01-282-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo grill models including:

• DGB494SPB
• DGB494SDP
• DGB515SDP
• DGB610SSP
• DGF493BNP
• DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R-X4
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 2.4

70-01-282-R Main Burner. Stainless steel. Fits Dyna-Glo grill models including:

• DGB494SPB
• DGB494SDP
• DGB515SDP
• DGB610SSP
• DGF493BNP
• DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

70-01-273-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGB493, DGB494, and DGB495 series grills. May fit other models.

This grate replaces original Dyna-Glo part 70-01-273.

Part Number: DG1-70-01-273-R
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 27 3/4”
Material: matte cast iron
Weight: 11.12

70-01-179-R-X4 Heat tent. Set of four (4). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 2.3

70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-SS-X4 Heat tent. Set of four (4). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

70-01-179-SS Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel grease draining tray with grease cup and holder. Made in USA .

Replaces Home Depot factory part# DYG-70-01-279

Part Number: CLA-DS0276
Dimensions: 15 3/4” x 26 7/8”
Material: stainless steel
Weight: 4.6

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Home Depot factory part# DYG-70-04-100

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1