Home > Home Depot Grill Models > Home Depot DGF510PBPDyna-Glo model DGF510SSP-D 5-Burner LP Gas Grill with Sear Side Burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.
Replacement grill parts for the Home Depot DGF510PBP
DGF510PBP Burners
70-01-282-R-X5 Main Burner. Set of five (5). Stainless steel. Fits Dyna-Glo grill models including:
- DGB494SPB
- DGB494SDP
- DGB515SDP
- DGB610SSP
- DGF493BNP
- DGF510SBP
May fit other models.
This part replaces original Dyna-Glo burner # 70-01-282.
Part Number: DG1-70-01-282-R-X5
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 3.1
$136.21
70-01-282-R Main Burner. Stainless steel. Fits Dyna-Glo grill models including:
- DGB494SPB
- DGB494SDP
- DGB515SDP
- DGB610SSP
- DGF493BNP
- DGF510SBP
May fit other models.
This part replaces original Dyna-Glo burner # 70-01-282.
Part Number: DG1-70-01-282-R
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6
$33.45
DGF510PBP Cooking Grates
70-01-293-R Cooking Grate. Porcelain enameled glossy finish cast iron grates. Sold as a 3-piece set.
Fits Dyna-Glo DGB515 and DGF515 series grills. May fit other models.
This grate replaces original Dyna-Glo part 70-01-293.
Part Number: DG1-70-01-293-R
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 29 5/8”
Material: gloss cast iron
Weight: 11.3
$78.11
DGF510PBP Heat Tents
70-01-179-R-X5 Heat tent. Set of five (5). Porcelain enameled steel.
Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 70-01-179.
Part Number: DG1-70-01-179-R-X5
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$95.72
70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.
Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 70-01-179.
Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$22.49
70-01-179-SS-X5 Heat tent. Set of five (5). Stainless steel.
Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.
This stainless heat tent replaces original Dyna-Glo part 70-01-179.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA Part Number: DG3-70-01-179-SS-X5
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 3.5
$108.63
70-01-179-SS Heat tent. Stainless steel. Sold individually.
Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.
This stainless heat tent replaces original Dyna-Glo part 70-01-179.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70
$23.42
DGF510PBP Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
DGF510PBP Grease Trays
Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder. Made in USA
.
Replaces Home Depot factory part# DYG-70-01-186
Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5
$99.95 $59.97
DGF510PBP Heat indicators and Meat Thermometers
Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.
Replaces Home Depot factory part# DYG-70-04-100
Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2
$9.95
DGF510PBP Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57