Home > Life@Home Grill Models > Life@Home GPC2619JLife@Home 2-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Life@Home grill.
Replacement grill parts to fit Life@Home model: GPC2619J
GPC2619J Igniter Components
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
GPC2619J Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
GPC2619J Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
GPC2619J Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57