Home > Lowes Grill Models > Lowes SLG2007BPerfect Flame 4-Burner LP gas grill with side burner, Lowe's item# 63033
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Lowes grill.
Part diagrams and owners manuals for Lowes model: SLG2007B
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Lowes model: SLG2007B
SLG2007B Burners
Stainless steel tube burner.
Includes- SS tube burner
- Electrode mounting bracket (not all models use bracket)
- Spider exclusion screen
- Adjustable air shutter.
NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.
Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6
$32.54
SLG2007B Burner Brackets and Carryovers
Stainless steel burner support bracket. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0071
Dimensions: 2 1/2” x 19 5/8”
Material: stainless steel
Weight: 0.80
$44.22
SLG2007B Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 67692
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 13.2
$93.88
SLG2007B Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Part Number: 92071
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 1.0
$26.58
Stainless steel
heat plate/Flame Tamer.
- Sold individually
- Made in USA
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0133
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.58
$23.66
SLG2007B Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
SLG2007B Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
SLG2007B Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59