Master Forge SH3118B

Premium grade 304 stainless steel tube burner. Sold individually, number required varies by grill.

Part Number: CLA-BS0256
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 0.45

Premium grade 304 stainless steel tube burner for Master Forge model SH3118B.

Part Number: KENMFT1
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 1.0

Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.

• Variable length burner adjusts from 13 1/2” to 17 1/2”.
• Includes extra hardware and mounting brackets to accommodate almost all grills.
• Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

CLA-MS0223 consists of two pieces referred to as A & B. The A is the front bracket and should be installed into the front of the grill; the B is the back bracket and should be installed into the back of the grill. These two parts are made to reinforce the grill wall holding the burners and flame tamers to extend the life of the grill. Instructions included. It will be necessary to purchase new electrodes, part# 03118. Made in USA

Part Number: CLA-MS0223
Dimensions: 20”
Material: stainless steel
Weight: 1.40

Cast iron cooking grids (set of 2). Porcelain treated, matte finish.

Part Number: 67222
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10

Cast iron cooking grid. Porcelain enameled, glossy finish. Sold individually.

Also available in more economical 3 & 4 grid sets. See part numbers 67243 and 67241-4PC.

Part Number: 67241
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: gloss cast iron
Weight: 3.12

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.

Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: porcelain cast iron
Weight: 5.55

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69762-UNI-X2 for a set of two (2) grids.

Part Number: 69762-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95

Stainless steel heat plate/ Flame Tamer for Master Forge model SH3118B.

Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8”
Dimension Side-to-Side: 4 1/8”
Material: stainless steel
Weight: 0.85

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Stainless steel grease tray. This is an unassembled two-piece tray. Unlike the original, it can be installed without disassembling the grill. Includes

• Two tray pieces: A left side, B right side
• Two grease cups
• Two grease cup holders
• All necessary nuts, bolts, and washers
• Assembly/installation instructions

Made in USA .

Part Number: CLA-DS0220
Dimensions: 14 3/4” x 31”
Material: stainless steel
Weight: 6.15

Alternative warming rack, no wire rods. Made in USA . For main cooking area, larger warming rack.

• Stainless steel
• Made in USA

Part Number: CLA-WS0222A
Dimensions: 6 15/16” x 19 15/16”
Material: stainless steel
Weight: 1.35

Alternative warming rack, not rods, for infrared burner area, smaller warming rack. Made in USA . With lip up and rear installed.

• Stainless steel
• Made in USA

Part Number: CLA-WS0222B
Dimensions: 6 15/16” x 9 3/8”
Material: stainless steel
Weight: 0.65

Front clip-on shelf made specifically for Master Forge model SH3118B as an extra front workspace. Includes three pieces with nuts and bolts for assembly. Instructions included.
Made in USA

Part Number: CLA-AS0221
Dimensions: 11” x 19 1/2”
Material: stainless steel
Weight: 2.85

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7