Home > Medallion Grill Models > Medallion CF9050
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Medallion grill.
Replacement grill parts for Medallion model: CF9050
CF9050 Burners
Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Sold individually, number required varies. Use one per burner.
- Includes mounting bolt and nut
- Includes extra holes for mounting to grill, if necessary.
- Comes with complete installation instructions.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Made in USA
Part Number: CLA-MS0227
Material: stainless steel
Weight: 0.11
Dimensions: 3 3/4” x 4 15/16”
Commercial premium 304 grade stainless steel burner for Medallion model CF9050.
Replaces Medallion factory part# 50003100
Part Number: 13001
Material: stainless steel
Weight: 0.8
Dimensions: 17” x 1”
$44.04
$20.15
CF9050 Cooking Grids
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 61271-UNI
Material: cast iron
Weight: 5.45
Dimensions:
- Front-To-Back: 16 7/16″
- Side-To_Side: 9 1/16″
$39.99
Cast iron
cooking grid.
Porcelain enameled, glossy finish.
Replaces Medallion factory part# 50001226
Part Number: 61271
Material: gloss cast iron
Weight: 7.0
Dimensions:
- Front-To-Back: 16 3/8″
- Side-To_Side: 9 1/8″
$87.09
$49.99
CF9050 Flame Tamers
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Material: stainless steel
Weight: 3.6
Dimensions:
- Front-To-Back: 14 1/2″
- Side-To_Side: 7 1/4″
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Medallion factory part# 50000877
Part Number: CLA-TS0016
Material: stainless steel
Weight: 1.3
Dimensions:
- Front-To-Back: 14 1/2″
- Side-To_Side: 7 1/4″
CF9050 Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Medallion factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
Rotary
piezo spark generator. Three
round connector leads send spark to both main burners and rotisserie burners. For use with all Ducane models with rear rotisserie burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Medallion factory part# 50000438
Part Number: 03230
Weight: 0.2
CF9050 Grease Trays
Stainless steel grease tray. Includes grease cup and grease cup holder. Made in USA

.
Replaces Medallion factory part# 50000822
Part Number: CLA-DS0191
Material: stainless steel
Weight: 2.40
Dimensions:
- Front-To-Back: 8 5/8″
- Side-To_Side: 24 1/2″
CF9050 Regulators and Hoses
Five piece 3/8” natural gas quick disconnect set includes:
- Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
- Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
- Hansen & Sturgis dust cover
- plastic dust plug
- Plastic 3/8 MPT Snap Tite
- Suitable up to approximately 60,000 BTU.
Part Number: ASCPL-1
Weight: 3.0
12 foot natural gas quick-connect hose.
- The hose end with SAE 3/8” female flare fitting connects to grill.
- Designed for use with quick connect coupling part# 81441
- Hose and coupling also available together as part# 80144.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. (Inside diameter of hose is 3/8” and the outside is about 5/8”.) See our
flare fitting description for information on measuring and sizes.
Replaces Medallion factory part# 50000198
Part Number: 81442
Weight: 2.3
Brass 3/8” natural gas quick connect coupling.
CF9050 Heat indicators and Meat Thermometers
Genuine OEM Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
CF9050 Accessories
Cherry wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00240
Weight: 1.14
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2” x 10”
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Medallion CF9050 - 02-Nov-26
|
We ship Medallion BBQ parts worldwide
Back to Medallion grill parts