Home > Member's Mark Grill Models > Member's Mark 720-0830F
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Member's Mark grill.
Replacement gas grill parts for Member's Mark model: 720-0830F
720-0830F Burners
Stainless steel tube burner for Member's Mark model 720-0830F.
Part Number: 10381
Dimensions: 15 x 1
Material: stainless steel
Weight: 0.5
$32.21
720-0830F Cooking Grids
Stainless steel
cooking grid. Sold as a set of two (2).
Part Number: 5S732
Dimension Front-to-Back: 17 3/16
Dimension Side-to-Side: 26 3/8
Material: stainless steel clad wire
Weight: 10.3
$120.13
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 61192
Dimension Front-to-Back: 17
Dimension Side-to-Side: 26 1/2
Material: matte cast iron
Weight: 12.10
$91.86
720-0830F Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
WARNING: This is the porcelain steel version of CLA-TS0157. The parts have the same dimensions except this version has a height that is 3/16 shorter than CLA-TS0157. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: 97371
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 0.55
$21.54
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.16
$48.77
SET OF FOUR/4 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.88
$62.52
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 0.72
$17.61
720-0830F Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16 x 2
Weight: 0.7
$38.00
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04433
Dimensions: 4 1/2
Weight: 0.2
$10.38
720-0830F Heat indicators and Meat Thermometers
Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2 offset on center. Requires 3/8 center hole for temperature sensor probe.
Part Number: 22551
Dimensions: 2 15/16 x 1 7/8
Weight: 0.2
$14.41
720-0830F Accessories
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
20 Professional Extra Long Tong.
20 Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73