Home > Member's Mark Grill Models > Member's Mark GR2234802-MM-00Members Mark 2-Burner Patio Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Member's Mark grill.
Replacement gas grill parts for Member's Mark model: GR2234802-MM-00
GR2234802-MM-00 Burners
stainless steel burner for Member's Mark model GR2234802-MM-00.
Part Number: 122L1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0
$58.31
stainless steel burner for Member's Mark model GR2234802-MM-00.
Part Number: 122R1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0
$58.31
GR2234802-MM-00 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 61752
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 18 5/8”
Material: gloss cast iron
Weight: 10.5
$75.24
GR2234802-MM-00 Flame Tamers
Porcelain steel Flame Tamers. SET OF TWO (2).
Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0
$84.82
Porcelain steel Flame Tamer for Member's Mark model GR2234802-MM-00.
Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5
$45.97
GR2234802-MM-00 Igniter Components
Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2
Image not available
$17.36
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.
Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1
$8.93
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
GR2234802-MM-00 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20
$19.15
GR2234802-MM-00 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96