Member's Mark MG3208SLP

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Member's Mark Grill Models > Member's Mark MG3208SLP

Member's Mark Stainless 3-burner LP gas grill with infrared searing burner, rear rotis burner, and side burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Member's Mark grill.

Part diagrams and owners manuals for Member's Mark model: MG3208SLP



Click small image to enlarge. Click Large image to reduce.
Double click for new window
Grill image for model: MG3208SLP
Exploded parts diagram for model: MG3208SLP
Parts list for model: MG3208SLP

Replacement grill parts for the Member's Mark MG3208SLP


 

MG3208SLP Burners

Stainless steel tube burner. Includes
  • SS tube burner
  • Electrode mounting bracket (not all models use bracket)
  • Spider exclusion screen
  • Adjustable air shutter.

Replaces Members Mark factory part# P020080244



Part Number: 10241
Dimensions: 14 3/4” x 1 1/8”
Material: stainless steel
Weight: 0.7

$35.35

Qty
 






 

MG3208SLP Savor Plates

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate. Sold individually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Members Mark factory part# P017080074



Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

$27.28

Qty
 




Stainless steel heat plate; also referred to as a flame tamer and savor plate for Member's Mark model MG3208SLP.

Replaces Members Mark factory part# P017080074



Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

$27.28

Qty
 






 

MG3208SLP Igniter Components

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.35

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.67

Qty
 




14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.58

Qty
 




Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

  • Wire not included. Commonly used with wire part# 03610.
  • Female spade connector on wire connects to male spade connector of electrode.
  • If used with existing wire, confirm connecting end of wire is a female spade connector
  • Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.



Part Number: 04010
Material: ceramic
Weight: 0.05

$6.58

Qty
 




Ignitor collector box with ceramic electrode and male round connector.
  • Wire not included. Commonly used with wire part# 03400.
  • Designed to connect to wires with round female connector.
  • If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Members Mark factory part# P02609030M



Part Number: 02623
Material: ceramic
Weight: 0.2

$10.87

Qty
 




Universal battery powered push button ignitor.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Members Mark factory part# P02502265C



Part Number: 03350
Weight: 0.7

$31.96

Qty
 




46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Qty
 






 

MG3208SLP Accessories

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60

Qty
 




Deluxe 17” stainless steel turner.
  • Soft comfort rubber grip
  • Stainless steel blade


Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

Qty
 




Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Qty
 




Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84

Qty
 




EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

$7.60

Qty
 





Member's Mark grill model MG3208SLP. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. 04-Apr-24



We ship Member's Mark BBQ parts worldwide

Back to Member's Mark grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping for orders of gas grill parts of $49 or more for Member's Mark gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, April 4, 2024

Sam's Club and Member's Mark are trademarks of Sam's Wholesale Club and Wal-Mart, and are not affiliated with CLA Grills & Service in any way.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy