MHP WHRG4

Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK.

Part Number: GG-HCSSB
Weight: 0.8

Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, if needed, see catetory Repair Parts part number GG-IBC.)

Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05

SearMagic Cooking Grids for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.

Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8 1/2”
Material: Anodized Aluminum
Weight: 2.2

Briquette grate for WHRG and THRG; has a one inch elevation by four corner support pegs/feet for MHP model WHRG4.

Part Number: GG-GRATE-HSS
Dimensions: 13 11/16” x 15 3/16”
Material: stainless steel
Weight: 3.00

3 Prong Electronic Ignitor for Infrared Grills

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB3
Weight: 0.2

Hybrid burner collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-HIB
Weight: 0.2

Infrared/Hybrid Ignitor Probe

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IIP
Weight: 0.02

Infrared Hybrid Probe Shield

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IPS
Weight: 0.03

Handle end caps, set of two # GG-SHC, for right and left side of stainless steel handle, with screws & gaskets for JNR, TJK, TRG, WNK, WRG.

Also included in handle kit GG-HANKIT.

Part Number: GG-SHC-SET
Weight: 0.3

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

Infrared burner clip, one, and two cotter pins for MHP model WHRG4.

Part Number: GG-IBC
Material: stainless steel
Weight: 0.02

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3