Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
MHP Igniter Components
Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some MHP grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
$4.65
Universal 2 5/8” adapter wire with female round and male
spade connectors for some MHP grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.35
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Universal battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has one (1) terminal (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03310
Weight: 0.3
$16.95
Universal volt battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Universal battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03330
Weight: 0.5
$18.48
Universal three-outlet battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
Universal battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has (5) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3
$19.43
Universal four-outlet battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Universal battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Universal battery powered push button ignitor for some MHP grills.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
Ignition connection wire used to connect battery powered spark generators to electrodes for some MHP grills. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors for some MHP grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal adapter wire with male round and female
spade connectors for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Single outlet electronic ignitor for some MHP grills. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB
Weight: 0.2
$31.52
|
|
3 Prong Electronic Ignitor for Infrared Grills
For more information about ignition systems and components, please see article Ignition 101 in our help center for some MHP grills.
Part Number: GG-EIB3
Weight: 0.2
$31.52
|
|
12” igniter connecting wire for battery-operated electronic igniters for some MHP grills. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
|
|
Hybrid burner collector box for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-HIB
Weight: 0.2
$13.80
|
|
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center for some MHP grills.
Part Number: GG-IB
Weight: 0.2
$13.11
|
|
Infrared/Hybrid Ignitor Probe
For more information about ignition systems and components, please see article Ignition 101 in our help center for some MHP grills.
Part Number: GG-IIP
Weight: 0.02
$12.58
|
|
Infrared Hybrid Probe Shield
For more information about ignition systems and components, please see article Ignition 101 in our help center for some MHP grills.
Part Number: GG-IPS
Weight: 0.03
Image not available
$6.08
|
|
Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows for some MHP grills.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-K9
Weight: 0.1
$5.45
|
|
Flat washer for igniter for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-M17
Weight: 0.1
$0.83
|
|
Single outlet rotary ignitor for some MHP grills. Fits JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RI
Weight: 0.1
$11.83
|
|
Rotary Ignitor kit for JNR, WNK, TJK for some MHP grills.
Includes:- GG-RI Rotary spark generator
- GG-K9 Knob
- GG-IB Electrode & Collector box
- GG-RIW Connecting wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIC
Weight: 0.3
$34.60
|
|
12” connecting wire for use with rotary igniters for some MHP grills. Does not fit battery-operated electronic igniters. Female
spade connector on one end connects to electrode, female
round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIW
Weight: 0.3
$6.44
|
|
Ceramic electrode with mounting bracket and 12” wire with
round connector for some MHP grills. Fits SBA2 side burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-SBA5
Weight: 0.2
$11.92
|
|
Ignitor Module for SBA2 side burner for some MHP grills.
- Uses AA batery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-SBA8
Weight: 0.2
$31.52
|
|
Universal collector box with electrode and wire for some MHP grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
Ignitor shield for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-DEF
Weight: 0.3
$13.45
|
|
Electronic Ignitor module for some MHP grills.
- Two outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB
Weight: 0.3
$31.52
|
|
Hybrid Electronic Ignitor module for some MHP grills.
- Four outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB4
Weight: 0.3
$31.52
|
|
Igniter collector box for GJK for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-IB
Weight: 0.15
$14.32
|
|
Electrode and 26” wire for some MHP grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: PF80-3828S
Weight: 0.2
$19.67
|
|
Universal 3 outlet rotary spark generator for some MHP grills. Includes knob.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-8B
Weight: 0.3
$21.96