Home > MHP Grill Models > MHP WRG2
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement BBQ grill parts for MHP model: WRG2
WRG2 Burners
Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, if needed, see catetory Repair Parts part number GG-IBC.)
Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05
$137.23
WRG2 Cooking Grids
SearMagic
Cooking Grids for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G.
- High Performance, Rust-Free Anodized Aluminum Cooking Grids.
- Sold individually, number required varies
This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8 1/2”
Material: Anodized Aluminum
Weight: 2.2
$74.58
WRG2 Igniter Components
3 Prong Electronic Ignitor for Infrared Grills
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB3
Weight: 0.2
$31.52
Infrared/Hybrid Ignitor Probe
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IIP
Weight: 0.02
$12.58
Infrared Hybrid Probe Shield
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IPS
Weight: 0.03
Image not available
$6.08
WRG2 Knobs and Handles
Handle end caps, set of two # GG-SHC, for right and left side of stainless steel handle, with screws & gaskets for JNR, TJK, TRG, WNK, WRG.
Also included in handle kit
GG-HANKIT.
Part Number: GG-SHC-SET
Weight: 0.3
$16.45
WRG2 Heat indicators and Meat Thermometers
Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.
- 2 1/2” diameter.
- Single prob
- Requires 3/8” mounting hole
Part Number: GG-TG4
Weight: 0.15
$21.23
Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.
Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15
$11.37
WRG2 Miscellaneous Repair Parts
Infrared burner clip, one, and two cotter pins for MHP model WRG2.
Part Number: GG-IBC
Material: stainless steel
Weight: 0.02
Image not available
$3.63
WRG2 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96