Home > Nexgrill Grill Models > Nexgrill 720-0036-HD-05Charmglow Stainless steel 3-burner LP gas grill sold by Home Depot
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.
Part diagrams and owners manuals for Nexgrill model: 720-0036-HD-05
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Nexgrill model: 720-0036-HD-05
720-0036-HD-05 Burners
Premium quality stainless steel tube burner for Nexgrill model 720-0036-HD-05.
Part Number: CLA-BS0211
Dimensions: 16 13/16 x 1
Material: stainless steel
Weight: 0.4
$29.99 $19.99
Stainless steel burner for Nexgrill model 720-0036-HD-05.
Part Number: CTB1
Dimensions: 16 7/8
Material: stainless steel
Weight: 1.0
$35.23
720-0036-HD-05 Cooking Grids
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16 solid stainless rods
- Made in USA .
- Sold individually.
See part CLA-GS0004-X2 for a more economical 2-pack.
Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4
Dimension Side-to-Side: 12
Material: stainless steel
Weight: 8.5
$91.34
720-0036-HD-05 Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0019
Dimension Front-to-Back: 17 1/4
Dimension Side-to-Side: 6 15/16
Material: stainless steel
Weight: 1.2
$35.10
SET OF THREE/3 PACK Stainless steel Flame Tamers. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0019-X3
Dimension Front-to-Back: 17 1/4
Dimension Side-to-Side: 6 15/16
Material: stainless steel
Weight: 3.6
$91.57
720-0036-HD-05 Knobs and Handles
Chrome and black plastic control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 2 5/16
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 02340
Dimensions: 2 5/16 x 2 5/16
Material: plastic
Weight: 0.1
$12.93
720-0036-HD-05 Regulators and Hoses
Type 1 LP Regulator with 22 Pressure Hose and 3/8 Female Flare Fitting.
FITS: Up to 60,000 BTUs
Part Number: HR-4B
Dimensions: 22
Weight: 0.8
$34.71
720-0036-HD-05 Valves, Orifices, and Manifolds
Flame thrower valve for LP grills. 15,000 BTU.
- Orifice included
- 30° angle
- Includes clamp and screws
Part Number: CLA-VL0231
Material: aluminum/brass
Weight: 0.50
$40.44
720-0036-HD-05 Rotisserie components
Rotisserie kit for Charmglow stainless 3-Burner models. THIS KIT INCLUDES A CUSTOM STANDOFF MOTOR BRACKET. Includes:
- Heavy-Duty R06 rotisserie motor with stainless steel case
- SR-5 31 X 5/16 spit rod
- BU-1 spit rod bushing
- PH-1 spit rod handle
- MH-1B Chrome-plated meat forks
- MB-4B Custom standoff rotisserie motor bracket and screws
- MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
- Maximum 25 lbs. balanced load
Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering.
NOTE: This kit does NOT include spit rod counter balance, which should on all spit rods be used to insure even weight distribution.
NOTE: Some of the parts in the kit are designed for a 5/16 rod. Rod SR-43, which is a 3/8 square rod and requires a 9/16 rod hole, will not work with some of the parts in this kit.
Part Number: RKCHAR1
Weight: 4.6
$100.72
720-0036-HD-05 Accessories
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73