Home > Nexgrill Grill Models > Nexgrill 720-0650
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.
Replacement grill parts for the Nexgrill 720-0650
720-0650 Burners
Premium quality stainless steel tube burner. Sold individually, number required varies by grill. Includes:
- Made of high quality 304 stainless steel
- Spider exclusion screen
- Ignition electrode mounting holes on both sides of burner
- Back mounting hole is round, inspect your old burner
Part Number: CLA-BS0201
Dimensions: 16 7/8” x 1”
Material: stainless steel
Weight: 0.4
$29.30
720-0650 Cooking Grids
Cast iron
cooking grids (set of 3).
Porcelain enameled, glossy finish.
Part Number: 65223
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: gloss cast iron
Weight: 22.0
$158.35
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 6 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Dimensions: 19 1/4” x 10 1/4”
- Made in USA .
- Sold individually.
See part CLA-GS0005-X3 for a more economical 3-pack.
Replaces Nexgrill factory part# 710-0014, 710-0015, 710-0016, 710-0017
Part Number: CLA-GS0005
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 1/4”
Material: stainless steel
Weight: 6.3
$101.27
Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 19 1/4”
- Side-to-Side: 10 3/8”
Total Side-to-Side: 31 1/8”Part Number: 65223-UNI-X3
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: cast iron
Weight: 21.3
$159.91
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 65233-UNI-X3 for a set of three (3).
Part Number: 65223-UNI
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 7.10
$60.53
720-0650 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually. Also known as a Flame Tamer.
Part Number: 93051
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 4 15/16”
Material: porcelain steel
Weight: 1.6
$28.00
720-0650 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
720-0650 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57