Home > Nexgrill Grill Models > Nexgrill 730-0230Charmglow Stainless steel 3-burner natural gas grill sold by Home Depot
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.
Replacement grill parts for the Nexgrill 730-0230
730-0230 Burners
Premium quality stainless steel tube burner for Nexgrill model 730-0230.
Part Number: CLA-BS0211
Dimensions: 16 13/16 x 1
Material: stainless steel
Weight: 0.4
$29.99 $19.99
Stainless steel burner for Nexgrill model 730-0230.
Part Number: CTB1
Dimensions: 16 7/8
Material: stainless steel
Weight: 1.0
$35.23
730-0230 Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0019
Dimension Front-to-Back: 17 1/4
Dimension Side-to-Side: 6 15/16
Material: stainless steel
Weight: 1.2
$35.10
SET OF THREE/3 PACK Stainless steel Flame Tamers. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0019-X3
Dimension Front-to-Back: 17 1/4
Dimension Side-to-Side: 6 15/16
Material: stainless steel
Weight: 3.6
$91.57
730-0230 Knobs and Handles
Chrome and black plastic control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 2 5/16
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 02340
Dimensions: 2 5/16 x 2 5/16
Material: plastic
Weight: 0.1
$12.93
730-0230 Valves, Orifices, and Manifolds
Flame thrower valve for natural gas. 15,000 BTU.
- Orifice included
- 30° angle
- Includes clamp and screws
Part Number: CLA-VN0232
Dimensions: 4 1/8
Material: aluminum/brass
Weight: 0.50
$37.40
730-0230 Rotisserie components
Rotisserie kit for Charmglow stainless 3-Burner models. THIS KIT INCLUDES A CUSTOM STANDOFF MOTOR BRACKET. Includes:
- Heavy-Duty R06 rotisserie motor with stainless steel case
- SR-5 31 X 5/16 spit rod
- BU-1 spit rod bushing
- PH-1 spit rod handle
- MH-1B Chrome-plated meat forks
- MB-4B Custom standoff rotisserie motor bracket and screws
- MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
- Maximum 25 lbs. balanced load
Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering.
NOTE: This kit does NOT include spit rod counter balance, which should on all spit rods be used to insure even weight distribution.
NOTE: Some of the parts in the kit are designed for a 5/16 rod. Rod SR-43, which is a 3/8 square rod and requires a 9/16 rod hole, will not work with some of the parts in this kit.
Part Number: RKCHAR1
Weight: 4.6
$100.72
730-0230 Heat indicators and Meat Thermometers
Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2 offset on center. Requires 3/8 center hole for temperature sensor probe.
Part Number: 22551
Dimensions: 2 15/16 x 1 7/8
Weight: 0.2
$14.41
730-0230 Accessories
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73