Home > Nexgrill Grill Models > Nexgrill 730-0953BKitchen Aid 3-Burner Natural Gas Grill Ceramic Sear Side Burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.
Replacement grill parts to fit Nexgrill model: 730-0953B
730-0953B Burners
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
Stainless steel burner for Nexgrill model 730-0953B.
Part Number: 10811
Dimensions: 16 1/2 x 1
Material: stainless steel
Weight: 0.7
$35.18
730-0953B Cooking Grids
Stainless steel
cooking grid. Sold as a set of three (3).
Part Number: 5S703
Dimension Front-to-Back: 18 13/16
Dimension Side-to-Side: 24 3/8
Material: stainless steel clad wire
Weight: 10.4
$167.69
730-0953B Flame Tamers
Stainless steel Flame Tamer. Sold individually.
Part Number: 90811
Dimension Front-to-Back: 16 1/2
Dimension Side-to-Side: 4 1/2
Material: stainless steel
Weight: 0.8
$27.56
730-0953B Igniter Components
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03344
Dimensions: 2 x 2 1/2
Weight: 0.5
$37.92
Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03621
Dimensions: 1 1/8 x 1 1/8
Weight: 0.1
$6.26
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04433
Dimensions: 4 1/2
Weight: 0.2
$10.38
730-0953B Heat indicators and Meat Thermometers
Round heat indicator. Single probe. Requires 13/16 mounting hole.
Part Number: 00745
Dimensions: 3 1/8 x 3 1/8
Weight: 0.3
$22.46
730-0953B Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73