Nexgrill 730-0958A

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Nexgrill Grill Models > Nexgrill 730-0958A

Nexgrill Deluxe 4-Burner Dual Energy Outdoor Gas Grill



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.

Replacement BBQ grill parts for Nexgrill model: 730-0958A


 

730-0958A Burners

Stainless steel tube burner for Nexgrill model 730-0958A.

Part Number: 10381
Dimensions: 15” x 1”
Material: stainless steel
Weight: 0.5

$32.21

Qty
 






 

730-0958A Cooking Grids

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

$91.86

Qty
 






 

730-0958A Flame Tamers

Stainless steel Flame Tamer. Sold individually.

Part Number: 97461
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.7

$23.44

Qty
 






 

730-0958A Igniter Components

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

$19.80

Qty
 




Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.
  • 1.5 volt
  • Has five (5) spark outlets (male spade connector)
  • Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
  • Uses a single AA battery (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

$39.89

Qty
 




Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

$6.26

Qty
 




Burner mounted electrode, 33” wire with female spade connector (notice end of connector wire has a 90 degree bend).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04434
Dimensions: 4 3/16” x 1 1/16”
Weight: 0.1

$9.89

Qty
 






 

730-0958A Heat indicators and Meat Thermometers

Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.

Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2

$15.90

Qty
 






 

730-0958A Accessories

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$25.40

Qty
 




16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

$16.59

Qty
 




Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Qty
 




Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84

Qty
 




deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7

$25.57

Qty
 





Nexgrill 730-0958A. We have a large inventory of BBQ accessories such as BBQ tools, baskets,
grill covers in our accessories section. 05-May-24



We ship Nexgrill BBQ parts worldwide

Back to Nexgrill grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

Replacement parts orders for Nexgrill grills $49 and more shipped to the USA (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy