Oklahoma Joe Igniter Components. Replacement Igniter Components for Oklahoma Joe grills. FREE shipping.

The best way to find the correct replacement Igniter Components for your Oklahoma Joe grill is to shop by Oklahoma Joe model number. If you don't know your model number, you can review all of the Oklahoma Joe Igniter Components we carry on this page. To help insure that you choose the correct replacement parts, we highly recommend that you measure your original parts and compare them to what we have listed below. This is best done with the parts out of the grill.

Oklahoma Joe Igniter Components

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Oklahoma Joe grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

$4.65

Universal 2 5/8” adapter wire with female round and male spade connectors for some Oklahoma Joe grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

Can change male round to male spade
Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

$4.65

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Oklahoma Joe grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

$4.37

Universal battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has one (1) terminal (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03310
Weight: 0.3

$17.34

Universal volt battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

$16.85

Universal battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03330
Weight: 0.5

$18.94

Universal three-outlet battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

$24.36

Universal battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has (5) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

$20.21

Universal four-outlet battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$28.77

Universal battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$30.62

Universal battery powered push button ignitor for some Oklahoma Joe grills.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$37.09

47” wire with female spade connector and square plastic connectors for some Oklahoma Joe grills. Used with battery powered spark generators.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$6.86

14” ground wire with female spade connector and eye connectors for some Oklahoma Joe grills. For use with 1.5 volt spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.85

Universal adapter wire with male round and female spade connectors for some Oklahoma Joe grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

$3.49

Burner mounted electrode for use with 15591 and 15491 burners for some Oklahoma Joe grills.

39” wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

$11.18

Battery powered push button igniter for some Oklahoma Joe grills.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$30.24

Push-button electronic igniter with four (4) spade connectors for some Oklahoma Joe grills. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2