Home > Patio Chef Grill Models > Patio Chef SS73
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Patio Chef grill. This is best done with the old parts out of the grill. Verify your Patio Chef grill model number.
Replacement grill parts to fit Patio Chef model: SS73
SS73 Burners
Cast iron burner for Patio Chef model SS73.
Replaces Patio Chef factory part# P02001062E
Part Number: 20561
Material: cast iron
Weight: 3.14
Dimensions: 15 x 3 1/2
SS73 Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Patio Chef factory part# P02502024C
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Patio Chef factory part# P02502024C
Part Number: 03340
Weight: 0.5
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Patio Chef factory part# P02502012C
Part Number: IGEIB2-B
Weight: 0.3
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Patio Chef factory part# P02502012C
Part Number: 03342
Weight: 0.3
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
SS73 Regulators and Hoses
Straight thru L.P regulator with 28 hose. Adequate to 90,000 BTU.
Replaces Patio Chef factory part# P03601011A
Part Number: HR-6B
Weight: 1.50
Dimensions: 28
SS73 Accessories
Set of six 22 stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.
Part Number: 40538
Material: chrome steel
Weight: 1.1
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Material: stainless steel
Weight: 0.14
Dimensions: 15
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11 diameter x 2.5 deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA 
Part Number: 00030
Weight: 0.1
|
Patio Chef SS73 - Oct 15 2025
|
We ship BBQ grill parts for Patio Chef gas grills worldwide
Back to Patio Chef grill parts
USA shipping for orders of gas grill parts of $49 or more for Patio Chef gas BBQ grills (contiguous 48 states only)