Range Master 463441914 | Parts ship FREE

Home > Range Master Grill Models > Range Master 463441914

Range Master 4-Burner LP gas grill with side burner

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Range Master grill.

Replacement grill parts to fit Range Master model: 463441914

463441914 Burners

Stainless steel straight pipe burner; uses electrode/wire # 04432 for Range Master model 463441914.

Replaces Range Master factory part# G431-0300-W2

Part Number: 16781
Dimensions: 14 11/16” x 1”
Material: stainless steel
Weight: 0.7

stainless steel burner for Range Master model 463441914

$32.54

All Range Master Burners

463441914 Cooking Grids

Porcelain ”stamped” steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of three (3).

Part Number: 53073
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 27 9/16”
Material: porcelain steel
Weight: 9.3

$96.41

Channel formed U-shaped porcelain steel cooking grids. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of three (3).

Replaces Range Master factory part# 80018559

Part Number: 50193
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 28 5/16”
Material: porcelain steel channels
Weight: 6.7

$81.64

All Range Master Cooking Grids

463441914 Heat Tents

Stainless steel aftermarket vented Heat Tent.

Stainless equivalent of part 98531
Sold individually
Made in USA

Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7

$23.47

Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.

This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.

Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6

$35.00

$23.49

All Range Master Heat Tents

463441914 Igniter Components

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

$16.46

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Range Master factory part# 80019100

Part Number: IGEIB4-B
Weight: 0.3

$31.52

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Range Master factory part# 80019100

Part Number: 03340
Weight: 0.5

$31.50

Battery powered push button igniter.

Has two (2) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Range Master factory part# F401-0012-W1

Part Number: IGEIB2-B
Weight: 0.3

$31.52

Universal volt battery powered push button ignitor.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Range Master factory part# F401-0012-W1

Part Number: 03320
Weight: 0.3

$27.78

All Range Master Igniter Components

463441914 Accessories

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

$27.83

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3

$9.31

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.