Home > Rankam Grill Models > Rankam GR2001401-GSGrillSmith Stainless Steel Patio Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Rankam grill.
Replacement gas grill parts for Rankam model: GR2001401-GS
GR2001401-GS Burners
Stainless steel burner for Rankam model GR2001401-GS.
Part Number: 120L1
Dimensions: 12 1/4” x 4 5/8”
Material: stainless steel
Weight: 1.0
$44.03
Stainless steel burner for Rankam model GR2001401-GS.
Part Number: 120R1
Dimensions: 12 1/4” x 4 5/8”
Material: stainless steel
Weight: 1.0
$44.03
GR2001401-GS Cooking Grids
Chrome steel
cooking grid. Sold individually.
Part Number: 41301
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 22”
Material: chrome steel wire
Weight: 3.7
$40.67
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 14 1/2” x 10 1/2”
- Overall dimensions: 14 1/2” x 21”
.
Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Commercial 304 grade stainless steel
cooking grid with 1/4” diameter rods. Sold individually. Made in USA
.
Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
NOTE:This single-piece part also replaces some two-piece grid sets.
Part Number: 51402-SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 1/2”
- Side-to-Side: 10 1/2”
Total Side-to-Side: 21”Part Number: 51702-SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. SOLD INDIVIDUALLY.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually
Part Number: 51702-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.8
$46.47
GR2001401-GS Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Part Number: 92021
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 1.3
$41.99
Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0132
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: stainless steel
Weight: 0.95
$21.14
GR2001401-GS Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
GR2001401-GS Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
GR2001401-GS Heat indicators and Meat Thermometers
Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.
Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2
$9.95
GR2001401-GS Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31