Home > Rankam Grill Models > Rankam GR2071001-MM-00Member's Mark Hybrid Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Rankam grill.
Replacement grill parts to fit Rankam model: GR2071001-MM-00
GR2071001-MM-00 Burners
Stainless steel burners. SET OF THREE (3). Has integrated gas collector box and electrode mounting bracket. Electrode not included.
Part Number: 16241-X3
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 1.5
$92.79
Stainless steel burner. Has integrated gas collector box and electrode mounting bracket. Electrode not included.
Part Number: 16241
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.5
$35.57
GR2071001-MM-00 Burner Brackets and Carryovers
Stainless steel burner cross-over tube for Rankam model GR2071001-MM-00.
Part Number: 09425
Dimensions: 7 5/16” x 2 3/8”
Material: stainless steel
Weight: 0.2
$14.09
GR2071001-MM-00 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 69762
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 20 3/4”
Material: gloss cast iron
Weight: 8.1
$71.78
Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 17 5/8”
- Side-to-Side: 10 3/8”
Total Side-to-Side: 20 3/4”Part Number: 69762-UNI-X2
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 20 3/4”
Material: cast iron
Weight: 13.9
$93.70
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69762-UNI-X2 for a set of two (2) grids.
Part Number: 69762-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95
$50.85
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Part Number: CG-67P-CI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95
$50.85
GR2071001-MM-00 Heat Shields
Stainless steel Heat Shield. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0134
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.69
$22.51
GR2071001-MM-00 Heat Distribution Plates
Porcelain steel heat distribution plate. Sold individually.
Part Number: 92151
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0
$25.40 $16.49
GR2071001-MM-00 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Burner mounted electrodes with male spade connectors. SET OF THREE (3).
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 09571-X3
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.3
$28.91
Burner mounted electrode with male spade connector.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 3 and 4 piece multi-packs. See part 09571-X3 and X4.
Part Number: 09571
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.1
$10.29
GR2071001-MM-00 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
GR2071001-MM-00 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59