Home > Rankam Grill Models > Rankam GR2234802-MM-00Members Mark 2-Burner Patio Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Rankam grill.
Replacement grill parts to fit Rankam model: GR2234802-MM-00
GR2234802-MM-00 Burners
stainless steel burner for Rankam model GR2234802-MM-00.
Part Number: 122L1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0
$58.31
stainless steel burner for Rankam model GR2234802-MM-00.
Part Number: 122R1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0
$58.31
GR2234802-MM-00 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 61752
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 18 5/8”
Material: gloss cast iron
Weight: 10.5
$75.24
GR2234802-MM-00 Flame Tamers
Porcelain steel Flame Tamers. SET OF TWO (2).
Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0
$84.82
Porcelain steel Flame Tamer for Rankam model GR2234802-MM-00.
Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5
$45.97
GR2234802-MM-00 Igniter Components
Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2
Image not available
$17.36
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.
Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1
$8.93
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
GR2234802-MM-00 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20
$19.15
GR2234802-MM-00 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57