Model: GR2264406-GS

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Rankam Grill Models > Rankam GR2264406-GS

GrillSmith 5 Burner Premium Gas Grill With Side Burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Rankam grill.

Replacement grill parts to fit Rankam model: GR2264406-GS


 

GR2264406-GS Burners

Stainless steel tube burner. Includes

WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.

Part Number: 16261
Material: stainless steel
Weight: 0.6
Dimensions: 17 1/2” x 1”

$46.12








 

GR2264406-GS Burner Brackets and Carryovers

stainless steel cross-over for Rankam model GR2264406-GS.

Part Number: 09431
Material: stainless steel
Weight: 0.2
Dimensions: 6 9/16” x 2 1/4”

$20.89








 

GR2264406-GS Cooking Grids

Aftermarket reversible heavy cast iron cooking grid.
  • Sold individually
  • Number required varies, check your grill
  • Porcelain treated, flat matte finish
  • Pointed side is designed for perfect sear marks
  • Grooved side captures juices for continous basting

Fits: Broil King 500/625/750 series grills.

NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.

Part Number: 22005-281-R
Material: Cast iron
Weight: 5.0
Dimensions:
  • Front-To-Back: 19 1/4″
  • Side-To_Side: 6 1/16″

$49.09






Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Part Number: 61812
Material: gloss cast iron
Weight: 15.0
Dimensions:
  • Front-To-Back: 19 1/8″
  • Side-To_Side: 26 3/8″

$122.83






matte finish cast iron cooking grid for Rankam model GR2264406-GS.

Part Number: 64443
Material: matte cast iron
Weight: 26.7
Dimensions:
  • Front-To-Back: 19 1/16″
  • Side-To_Side: 26 13/16″

$169.40






Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually.

Part Number: 65041
Material: matte cast iron
Weight: 8.11
Dimensions:
  • Front-To-Back: 19 1/8″
  • Side-To_Side: 13″

$85.93








 

GR2264406-GS Heat Plates

Stainless steel heat plate/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP7
Material: stainless steel
Weight: 0.5
Dimensions:
  • Front-To-Back: 16 13/16″
  • Side-To_Side: 3 3/16″

$24.34








 

GR2264406-GS Heat Tents

Stainless steel Flame Tamer heat tent.
  • Stainless equivalent of part 91751
  • Superior to the porcelain steel originals
  • Rust and corrosion restitant
  • Sold individually
  • Made in USA


Part Number: 91751-SS
Material: stainless steel
Weight: 0.5
Dimensions:
  • Front-To-Back: 16 13/16″
  • Side-To_Side: 3 3/16″

$24.34








 

GR2264406-GS Igniter Components

Universal battery powered push button ignitor.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03350
Weight: 0.7

$37.92






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61






Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

  • Wire not included. Commonly used with wire part# 03610.
  • Female spade connector on wire connects to male spade connector of electrode.
  • If used with existing wire, confirm connecting end of wire is a female spade connector
  • Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.



Part Number: 04022
Material: ceramic
Weight: 0.1

$7.83








 

GR2264406-GS Warming Racks

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24” rack.
  • Far superior to the original porcelain coated steel rack
  • Rests on your existing cooking grids.
  • Solid 1/4” 304 stainless steel rods.
  • Stands 3.75 inches tall.
  • Made in USA .

NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?

  • Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
  • Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.

    Part Number: CLA-WS0040
    Material: stainless steel
    Weight: 4.8
    Dimensions:
    • Front-To-Back: 6 1/4″
    • Side-To_Side: 22 7/8″

$71.75








 

GR2264406-GS Accessories

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.



Part Number: 76745
Material: stainless
Weight: .2

$7.74






2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14

$7.45






Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Weight: 0.2
Dimensions: 13

$8.76






Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84






Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.



Part Number: 24795
Weight: .3

$13.25







Rankam GR2264406-GS - 02-Nov-26



We ship Rankam BBQ parts worldwide

Back to Rankam grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Rankam grills $79 and more shipped to the USA (contiguous 48 states only) Free of charge.

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy