Model: REGAL04CLP

Cast iron burner for Sams model REGAL04CLP.

Replaces Sams factory part# P02001009E

Part Number: 23311
Dimensions: 13 7/8” x 2 1/2”
Material: cast iron
Weight: 3.5

Stainless steel burner support/cross over tube. Made in USA . Replaces OEM # P02203102B.

Part Number: CLA-MS0237
Dimensions: 2 1/4” x 23 7/8”
Material: stainless steel
Weight: .85

Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Replaces Sams factory part# P01615015A

Part Number: 60662
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: gloss cast iron
Weight: 13.14

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 17 3/8”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 31 5/16”

Part Number: 53801-SS-X2
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 23 1/2”
Material: stainless steel
Weight: 15.6

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• 5/16” solid rods
• Sold individually

Fits: Beaumark, Broil-Mate, Broil King, Centro, Charbroil, Charmglow, Costco, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, John Deere, Kalamazoo, Kenmore, Kmart, Martha Stewart, Master Chef, Members Mark, Nexgrill, Patio Chef, S.R.Potten, Sams, Savor Pro, Sonoma, Sure Heat, Thermos, Uniflame, Vermont Castings, Wal Mart, Walmart, Weber. May fit others.

Part Number: 53801-SS
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 7.8

Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 16 15/16”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 23 1/2”

Part Number: 60662-UNI-X2
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: cast iron
Weight: 14.30

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60662-UNI-X2 for a set of two (2).

Part Number: 60662-UNI
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually, number required varies.

Part Number: 60663-1PC
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 6.7

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 5/16”
• Side-to-Side: 11 11/16”

Total Side-to-Side: 23 3/8”

Part Number: 69112-UNI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 3/8”
Material: cast iron
Weight: 14.7

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69112-UNI-X2 for a set of two (2) grids.

Part Number: 69112-UNI
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 7.35

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-63P-CI
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

Cast iron cooking grids (set of 2). Porcelain treated, flat matte finish.

Part Number: 69112
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 23 1/4”
Material: cast iron
Weight: 9.0

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

Porcelain steel Flame Tamer for Sams model REGAL04CLP.

Replaces Sams factory part# P01705006E

Part Number: 90161
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: porcelain steel
Weight: 1.4

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0128
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.03

Ignitor collector box with ceramic electrode and male round connector.

• Wire not included. Commonly used with wire part# 03400.
• Designed to connect to wires with round female connector.
• If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Sams factory part# P02609002B

Part Number: 02623
Material: ceramic
Weight: 0.2

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Sams factory part# P02502024C

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Sams factory part# P02502024C

Part Number: 03340
Weight: 0.5

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.

The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanks—perfect for grilling, camping, patio heaters, and more
Made in USA

Part Number: 00030
Weight: 0.1