Home > Smoke Canyon Grill Models > Smoke Canyon GR2002401-SC-00
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Smoke Canyon grill.
Part diagrams and owners manuals for Smoke Canyon model: GR2002401-SC-00
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Smoke Canyon model: GR2002401-SC-00
GR2002401-SC-00 Burners
Stainless steel burner for OEM # 154-9520-0 for Smoke Canyon model GR2002401-SC-00.
Part Number: BMTB3
Dimensions: 15 5/16
Material: stainless steel
Weight: .70
$35.23
GR2002401-SC-00 Burner Brackets and Carryovers
Stainless steel cross over tube. Channels gas between burners.
Part Number: BMCO3
Dimensions: 2 3/8” x 8 1/4”
Material: stainless steel
Weight: 0.15
$13.80
GR2002401-SC-00 Cooking Grids
Cast iron
cooking grids. SET OF FOUR (4).
Part Number: CG-73P-CI-X4
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35”
Material: cast iron
Weight: 22.20
$157.07
Cast iron
cooking grids (set of 4).
Porcelain treated, flat matte finish.
Part Number: 64104
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 35 1/2”
Material: cast iron
Weight: 14.1
$102.62
GR2002401-SC-00 Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Part Number: 99411
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 0.7
$22.23 $15.99
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0215-X3
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.8
$44.72
Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0215
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.6
$16.16
GR2002401-SC-00 Igniter Components
Push-Button self-grounding
piezo spark generator. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Part Number: 03100
Weight: 0.1
$9.25
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box, ceramic electrode, 7” wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 08410
Material: ceramic
Weight: 0.3
$13.92
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
GR2002401-SC-00 Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
GR2002401-SC-00 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59