Home > Smoke Hollow Grill Models > Smoke Hollow 1800CGSSmoke Hollow Gas/Charcoal grill combo with side smoker box
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Smoke Hollow grill.
Part diagrams and owners manuals for Smoke Hollow model: 1800CGS
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Smoke Hollow model: 1800CGS
1800CGS Burners
Stainless steel tube burner. Includes
Part Number: 18311
Dimensions: 16 1/8” x 1”
Material: stainless steel
Weight: 0.5
$32.95
1800CGS Heat Tents
Stainless steel replacement heat tent. Sold individually.
Made in USA Replaces Smoke Hollow factory part# 1800CGS-19
Part Number: 1800CGS-19-R
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: Stainless steel
Weight: 0.6
$25.56
1800CGS Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
1800CGS Knobs and Handles
Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0
$45.35
1800CGS Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
1800CGS Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31