Smoke Hollow 47180T

Stainless steel tube burner. Includes

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter.

Replaces Smoke Hollow factory part# TR040

Part Number: 18311
Dimensions: 16 1/8” x 1”
Material: stainless steel
Weight: 0.5

Cast iron cooking grid for Smoke Hollow model 47180T.

Part Number: 67005
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 53 7/16”
Material: matte cast iron
Weight: 19.0

47183T-11-R Charcoal and Sear Burner Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Three (3) required for most models
• Sold individually

This part replaces original OEM part# 47183T-11.

Part Number: 47183T-11-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

47183T-12-R Gas Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Two (2) required for most models
• Sold individually

Relaces original OEM part# 47183T-12, which was a glossy porcelain grid.

Replaces Smoke Hollow factory part# 47183T-12

Part Number: 47183T-12-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

Stainless steel replacement heat tent. Sold individually.
Made in USA

Replaces Smoke Hollow factory part# TR032

Part Number: 1800CGS-19-R
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: Stainless steel
Weight: 0.6

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel charcoal drip tray (OEM TR028) and gas drip tray (OEM 47183T-30) with handle. Can be used for either purpose as a replacement, however it does not include a drip hole as in the original gas drip tray. Clean tray periodically for a longer life. Made in USA

NOTE: For model SH7000 charcoal drip tray OEM# SH7000-3, please measure & compare to your old tray to make sure this is the correct size for your model.

Replaces Smoke Hollow factory part# TR028

Part Number: CLA-DS0305
Dimensions: 17 7/8” x 20 1/4”
Material: stainless steel
Weight: 3.9

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2