Smoke Hollow 47183T

47183T-02-R Stainless steel replacement tube burner for Smoke Hollow OEM # 47183T-02. Electrode sold seperately # 04010 or # IG-20B. Includes:

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter

Replaces Smoke Hollow factory part# 47183T-02

Part Number: 47183T-02-R
Dimensions: 18 5/16” x 1”
Material: stainless steel
Weight: 0.5

47183T-11-R Charcoal and Sear Burner Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Three (3) required for most models
• Sold individually

This part replaces original OEM part# 47183T-11.

Part Number: 47183T-11-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

47183T-12-R Gas Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Two (2) required for most models
• Sold individually

Relaces original OEM part# 47183T-12, which was a glossy porcelain grid.

Replaces Smoke Hollow factory part# 47183T-12

Part Number: 47183T-12-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

Stainless steel replacement Heat Tent. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Replaces Smoke Hollow factory part# 47183T-24

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

Stainless steel charcoal drip tray (OEM TR028) and gas drip tray (OEM 47183T-30) with handle. Can be used for either purpose as a replacement, however it does not include a drip hole as in the original gas drip tray. Clean tray periodically for a longer life. Made in USA

NOTE: For model SH7000 charcoal drip tray OEM# SH7000-3, please measure & compare to your old tray to make sure this is the correct size for your model.

Replaces Smoke Hollow factory part# 47183T-30

Part Number: CLA-DS0305
Dimensions: 17 7/8” x 20 1/4”
Material: stainless steel
Weight: 3.9

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3