Sonoma SGR30LP

Premium quality stainless steel tube burner for Sonoma model SGR30LP.

Part Number: CLA-BS0203
Dimensions: 21 1/2” x 21 1/2”
Material: stainless steel
Weight: 1.6

Stainless steel triple burner set for Sonoma model SGR30LP.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Sonoma model SGR30LP.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

Porcelain steel Flavor Grid. Sold individually, number required varies by grill.

Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1

Bottom Flavor Grid. Stainless steel. Made in USA .

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

Flavor grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98

Upper flavor grid. Stainless steel. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Has unique underside, see photos.

Part Number: CLA-TS0182
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.2

Ceramic electrode with mounting hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01683
Material: ceramic
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Genuine OEM 21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Electrode heat shield. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7