Home > Sterling Grill Models > Sterling 1710-7
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 1710-7
1710-7 Burners
Genuine OEM Sterling stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10077
Dimensions: 8” x 16”
Material: Stainless steel
Weight: 2.5
$59.56
1710-7 Cooking Grids
Genuine OEM Sterling
cooking grid SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled steel, glossy finish
Part Number: 10225-T341
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 11”
Material: Porcelain steel
Weight: 2.15
$21.20
1710-7 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave SS
heat plate for Sterling model 1710-7.
Part Number: 10222-T325
Dimension Front-to-Back: 10 3/8”
Dimension Side-to-Side: 18”
Material: Stainless steel
Weight: 2.4
$37.41
1710-7 Igniter Components
Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
$6.37
Genuine OEM Sterling collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18” wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
1710-7 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
1710-7 Knobs and Handles
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4” long. Requires 8 3/4” mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
1710-7 Regulators and Hoses
Genuine OEM Sterling NG gas hose for Sterling model 1710-7.
Part Number: 10111-K45
Weight: 2.1
$88.64
1710-7 Wheels and Castors
Genuine OEM Sterling 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Sterling model 1710-7.
Part Number: 10240-13
Weight: .10
$2.23
1710-7 Warming Racks
Genuine OEM Sterling warming rack.
- Front-to-back of rack itself: 11 7/8”
- Side-to-side of rack itself: 21 5/8”
- Length of rear mounting rod: 24 1/2”
- Length of front swing-away rod: 23 5/8”
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
1710-7 Valves, Orifices, and Manifolds
CONTROL ASSEMBLY 40M 2V NG 3/8 -- CASTING for Sterling model 1710-7.
Part Number: 10440-E35
Weight: 1.0
Image not available
$32.60
1710-7 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 1710-7.
Part Number: S21233
Weight: 0.01
$1.08
Cap stepped end leg plug for Sterling model 1710-7.
Part Number: S21350
Weight: 0.1
$2.06
1710-7 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59